Double Continuous Skiving Machine Type CSM02

Continuous Skiver for Any Joint Type with Gluer, Dryers, Tape Applicator, Semi-Auto Joint and Press

The skiving machine type CSM02 is manufactured to process simultaneously both laps of paper and cloth narrow belts. Even though ideal for narrow belts, the machine can be equipped to work also wide belts. The CSM02 machine is indicated for converters with high productions.

Technical Data

  • Automatic continuous cycle with a feeding conveyor belts system, at variable speed
  • Ideal either for overlapped joints or butt joints
  • Cycle with variable speed up to 12 m/min. (367 FPM)
  • Standard working direction from left to right
  • In the standard version, the machine can be provided with a maximum of 12 working units and 2 gluers (roller NGA-15 or spray NSA), 7 working units on the upper working line and 7 on the lower one
  • Infrared oven, 2400 mm length, with stepless regulation, installed after the gluing unit
  • Inserting station for 1500 mm wide belts
  • Nylon roller table as support for long and for wide belts on hinges to be swinged up or down

ATA—Automatic Tape Applicator

The tape is introduced once through the gluing and drying devices. The tape is driven automatically and applied to the belt lap. The tape ends are the same length of the joint.

  • Gluing unit and drying element for the tape
  • PLC control
  • Photocell counter for detecting of the joint length
  • Shear cutter for automatic tape cutting
  • Standard cutting angle 45°, 55°, 67°, 75° (other angles upon request)
  • Tape roll unwinder: standard width 19 mm (25 mm also possible)
  • Tape roll max. diameter 300 mm, internal diameter 75 mm

SAJ-M—Semi-Automatic Joining Station

The CSM02 skiving machine can be equipped with semi-automatic joining station and continuous press BPN.

  • After being processed through units, gluer, oven and tape (optionally) the belts automatically stop in joining position
  • The operator takes the free lap and perform the joint manually
  • The closed belt is then processed by the continuous press BPN
  • The press beam is heated
  • With the addition of this device, productivity of 10 belts/minute for 310 x 440 mm belts can be reached

Size and Power (with Joining Station)

  • Overall machine dimensions: 12.5 x 1.3 x 2.3 m
  • Approx. weight: 6,100 kg
  • Installed power: 32 kW
  • Air consumption: 17,000 Nl/h (with air blows), 7,000 Nl/h (without air blows)
Double Continuous Skiving Machine Type CSM02